Rädlinger primus line GmbH is the manufacturer of the Primus Line® system, an innovative relining solution for the trenchless rehabilitation of pressure pipes for different applications such as water, gas and oil. The system consists of a flexible Kevlar® reinforced liner and specially developed end fittings. Clients benefit from long insertion lengths of up to 2,500 m in one single step and the product’s ability to traverse bends of up to 45 degree.
Primus Line® is not bonded to the host pipe and is self-supporting. An annulus remains between Primus Line® and the host pipe.
Small construction pits, short rehabilitation times and the low level of impact on the environment, make Primus Line® the ideal technology for the rehabilitation of defective lines in sensitive environments. Developed by experienced engineers and more than 15 years in business, the system is suitable for various application needs and has already proven itself in numerous projects.
Primus Line® -
the prime solution for pipes
Primus Line® is a flexible sliplining solution for the trenchless rehabilitation of pressure pipes. The system consists of a flexible Kevlar® reinforced liner and specially developed end fittings. Primus Line® is not bonded to the host pipe and is self-supporting. An annulus remains between Primus Line® and the host pipe. Developed by experienced engineers, the system is suitable for different media as well as various application needs and has already proven itself in numerous projects.
Primus Line Hose
Due to its multi-layered structure and very small wall-thickness,
the Primus Line hose provides both flexibility and ultra high material
Outer Layer: Abrasion-resistant PE sheath
Kevlar®-Fabric: Seamless woven aramid fibres
(single-layer or double-layer fabric design)
Inner Layer: Media-specific based on PE or TPU
Primus Line Connector
At the ends, the Primus Line hose is connected to the existing pipe using Primus Line connectors. The high-pressure connector consists of a contoured internal core and external sleeve. The external sleeve has a malleable steel jacket on the inside. A resin, which is injected through a valve on the external sleeve, forces the steel sleeve and Primus Line® into the contours of the internal core. So we obtain a durable, pull-proof connection.
Primus Line® is produced in nominal diameters from DN 150 to DN 500.
The hose is inserted into the host pipe from small construction pits - thus avoiding large roadworks. Primus Line® is not attached to the host pipe and is self-supporting. An annulus remains between Primus Line® and the host pipe.
Situation: Sydney Water Corporation (SWC) is a New South Wales owned government corporation responsible in providing safe drinking water and sanitation services to over 5 million Sydney residents. SWC is arguably the largest water utility in the southern hemisphere and is highly regarded in Au...| » Further reading
Task: The Lismore City Council was confronted with the rehabilitation of a leaking DN 225 uPVC Class 9 water main located at Elizabeth Street. The first section of the pipe runs downhill into a gully with a length of 170 m and a height difference of approximately 35 m where a scour valve is lo...| » Further reading
Task: The network operator United Utilities plc and Amey plc, located in the Northern part of the United Kingdom, were confronted with a leaking sewer rising main. The ductile iron pipe was installed in the 1970s and showed significant deterioration. Pinholes were present and the wall thicknes...| » Further reading
Rädlinger primus line GmbH
Kammerdorfer Str. 16
Phone: +49 9971 4002100
Fax: +49 9971 4002123
Get in contact with German companies in 3 easy steps! With one single question you can reach all relevant German Pavilion exhibitors of your selected industrial branch.
Click here if you notice an image that violates copyright or privacy rights.